CMT-330TC
CMT-330TC
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” (307 mm) tall by 12.9” (328 mm) wide and down to 5.875” (149 mm) tall by 3.937” (100 mm) wide. Designed and built in Michigan-USA, the CMT 330TC utilizes powerful hydraulic cutting and clamping pressure to effortlessly cut up to a 2” (50.8 mm) thick book.
The CMT 330TC utilizes servo and stepper motors to accurately position books for cutting. Full digital control of the set-up allows book size changes in less than 6 seconds. There is no need to perform manual adjustments or exchange book clamps. The CMT 330TC exclusively features simultaneous in-line and near-line feeding capability. This allows the trimmer to automatically switch between feeding books directly from an in-line perfect binder or from a manually loaded near-line book pile feeder. If one system is waiting for the next book, the other system can feed the trimmer to provide maximum production throughput.
The CMT 330TC Trimmer incorporates the most advanced book trimming technology available. The new 10.5” color touch screen display, easy to use operator interface and smart diagnostic assistance makes the CMT 330TC the leader for operational simplicity. Automatic size detection of the pre-trimmed book makes job programming easy, requiring the entry of only three dimensions. Alternatively, the integrated bar code reader can scan the trim dimensions from a pre-printed barcode on the cover to adjust the knife settings automatically. Simply stated, the CMT 330TC is a fully automated book-of-one trimming solution.
Key Features
Capability to trim landscape formatted books up to 12.1" (307 mm) x 12.9" (328 mm)
Full high-speed digital control for fast and accurate set-ups in under 6 seconds
Bar code system for fully automated set-up
Simultaneous in-line and near-line book feeding option to maximize utilization
Automatic size detection of untrimmed book blocks
10.5" (267 mm) color touch screen display
Precision knife depth control reducing cut stick wear and knife depth machine adjustments
Automated precision finish cut mode for jobs with large spine trim cuts
Live graphical display of book path
Thickness range up to 2" (51 mm)
Hydraulic powered cutting
No tools or clamp boards required during book size changes
Integrated computer diagnostics with graphical display of sensor locations
Strong knife assembly and table support design to minimize deflection
Specifications
Starting Book Size Maximum (spine length x book width) 13" x 13" (330 mm x 330 mm)
Starting Book Size Minimum (spine length x book width)
Near-line single mode 7" x 5" (178 mm x 127 mm)
Near-line multiple mode 7" x 8" (178 mm x 203 mm)
In-line single mode 7" x 8" (178 mm x 203 mm)
In-line multiple mode 7" x 9" (178 mm x 229 mm)
Finished Book Size Maximum (spine length x book width) 12.1" x 12.9" (307 mm x 328 mm)
Finished Book Size Minimum (spine length x book width) 5.82" x 3.94" (148 mm x 100 mm)
Minimum Trim, all sides 100" (2.5 mm)
Maximum Trim - Top 6" (152 mm)
Maximum Book Thickness 2" (51 mm)
Throughput Up to 700 books per hour (multi-book mode)
Memory 99 Book Jobs
Set-up Time for Book Size Change Under 6 Seconds
ELECTRICAL OPTIONS (UL, cUL, CE)
60 Hz, AC, 3 Phase 208/230 Volts, 20 Amps (service size 30 Amps)
50Hz, AC, 3 Phase 380/415 Volts, 16.5 Amps (service size 20 Amps)
50Hz, AC, 3 Phase 200-208 Volts, 20 Amps (service size 30 Amps)
COMPRESSED AIR REQUIREMENTS
The CMT-330TC requires 80 - 90 PSI (550 - 620 kPa) regulated, dry, non-lubricated compressed air at a minimum of 9 CFM at 90 PSI (255 LPM at 620 kPa). The required minimum air quality rating is ISO 8573.1 Class 2.4.2 (solids < 1 micron, pressure dew point < 38°F @100psig, and oil content < .08 ppm)
The following two compressor systems are commonly used with the CMT-330TC. Other equivalent systems may be used also. The compressor system must include an air dryer capable of ISO Class 4 or better (pressure dew point < 38°F @100psig). Failure to use dry, non-lubricated compressed air that meets or exceeds the above requirements may cause damage to the machine and will result in THE WARRANTY BEING VOIDED.
System 1 - Traditional piston type compressor. Powerex AS0203 - 2 hp climate control compressor with built-in refrigerated dryer, electronic auto drain and starter.
System 2 - Rotary scroll type compressor. The advantage to this type is minimum maintenance and very quiet operation (49 - 51 db). Powerex SES0308-208v with ACO100010 factory installed refrigerated dryer and auto drain.